Polyamide fiber accounted for 1.14, polyamide fiber as disadvantages UV light is a bit poor, such as in the outdoors for a long time by the sunshine, then prone to yellow, intensity decreased.

1, good wear resistance.

2, high fracture strength.

3, The moisture content at the temperature of 20℃ and the relative humidity of 65% is 3.4~3.8.

4, heat resistance: heat resistant polyamide fiber of the poor, at 150 degrees Celsius after 5 hours is yellow, 170℃ begin to soften, the best below 120 ℃, but low temperature resistant polyamide fiber good, even in low temperature 70 ℃ below zero, the elastic recovery rate changed little.

5, Chemical resistance: polyamide fibers are alkaline, but acid resistant.

MOLON is composed of NYLON66 filled MOS2 system, has better stability and wear resistance.

NYLON and MOLON are mainly used in high pressure conditions, but also more prominent disadvantages of polyamide material, limiting its use.

According to different conditions can choose different models (such as high temperature resistance of PA46 and low temperature performance and better toughness of,PA12 etc.).